shock absorber FA-S1410RD-*
- Industrial machinery
Dust seal type
|Maximum absorption energy J（kgf・m）||5.88(0.6)|
|Absorption energy per minute J（kgf・m）||147(15)|
|Max. equivalent mass kg（kgf）||4.5()|
|Range of impact rate m/s||0.7～3|
|Maximum operation cycle cycle/min||60|
|Operating temperature range ℃||-5～70|
|Max. drag N（kgf）||1813(185)|
Notes on specifications / Adjusting method
Please peruse the operation manual carefully before use. Do not operate without sufficient mounting strength. Do not operate without an external stopper. Note that Products specification might be changed without notice.
If you are not familiar with choosing a suitable shock absorber,
you can utilize our selection process to start with.
What you have to do is just input the necessary data of your conditions.
However, should you have any concern or doubt, please contact us freely via the inquiry tab.
In addition, if you have any questions about the use and selection results of the tool and product specifications, please feel free to contact us.