shock absorber FA-1010D4-C
- Industrial machinery
- Fixed type
Bellofram Seal Type (Since there is no sliding resistance between the piston rod and the packing, returning spring force of piston rod can be made small, and it is available to absorb small energy softly.)
|Maximum absorption energy J（kgf・m）||3.23(0.33)|
|Absorption energy per minute J（kgf・m）||78.4(8)|
|Max. equivalent mass kg（kgf）||20()|
|Range of impact rate m/s||0.1～1|
|Maximum operation cycle cycle/min||45|
|Operating temperature range ℃||-10～50|
|Max. drag N（kgf）||980(100)|
Notes on specifications / Adjusting method
Please peruse the operation manual carefully before use. Do not operate without sufficient mounting strength. Do not operate without an external stopper. Note that Products specification might be changed without notice.
If you are not familiar with choosing a suitable shock absorber,
you can utilize our selection process to start with.
What you have to do is just input the necessary data of your conditions.
However, should you have any concern or doubt, please contact us freely via the inquiry tab.
In addition, if you have any questions about the use and selection results of the tool and product specifications, please feel free to contact us.